Home > Stocks 10/22 >

Aklys Defense Bullpup Gunstock
Aklys Defense Bullpup Gunstock
 
: $289.00
Sale Price: $259.00
You save $30.00!

Stock Status: (Out of Stock ... Backorders Accepted)

Product Code: ZK22-BM

Description
 

ZK-22 Kit Features:

-Engineered, designed, built and assembled in the USA!

-Easy install. No gunsmith needed. Install at home.

-Accepts 18.5" inch or longer Ruger or aftermarket barrels up .920 in diameter. The stock comes with adapters that will let you use standard or heavy barrels.

-Accepts most full capacity magazines including the MWG 50 round coffin magazine and the Ruger BX-25!!!!!

-Provides rail mount system for mounting optics or other accessories.

-Ambidextrous charging handle, Sling point mounts, safety and mag release.

-Integral trigger safety.

-Adjustable trigger interface to tune to your preference of triggers.

-Shell deflector included allowing for full ambidextrous use.

NO FFL NEEDED! SHIPS RIGHT TO YOUR HOME! Made for RUGER 10/22 22LR models only. Not available for any other brand/type/caliber of firearm.

**This stock requires an 18.5" inch or longer barrel length Ruger 10/22 in order to not violate NFA overall length requirements.**
Features

The Aklys Defense ZK-22 rifle is a Ruger 10/22 rifle with factory barrel, or bull barrel, built in our ZK-22 bullpup stock!

The ZK rifle turns a Ruger carbine into a lightweight coolest .22lr rifle on the block or range.

May we also suggest...
PA RECEIVER / STOCK TAKEDOWN CAP SCREW, STAINLESS STEEL
  $7.25

Add
PA RECEIVER / STOCK TAKEDOWN CAP SCREW, STAINLESS STEEL

Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 3 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Bullpup 10/22 July 8, 2021
Reviewer: Clint from East TX United States  
Purchased this bullpup stock mostly because I’ve wanted one for several years. I originally bought a HTA 90/22 stock and was happy with that.  The ZK-22 feels better  than the other one. It takes a while to install, but it’s worth it. Be sure to clean the crap out of your 10/22 before installing, because you won’t want to take it apart to clean it afterwards. The trigger is better on the ZK than the HTA.  Neither feel like a cheap plastic toy, but the ZK did have some sharp edges that needed sanding smooth. I kept the factory 18.5” barrel to keep overall length legal, but have since ordered a WhistlePig barrel 18.5. Read other reviews, I did have to sand the trigger bar, but not the channels. Hopefully this helps anyone thinking of purchasing the ZK-22 stock, you won’t be disappointed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very fast March 22, 2020
Reviewer: Juan Diaz from San Diego , CA United States  
Very fast

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4 of 5 While waiting for this product buy sandpaper. April 28, 2019
Reviewer: John W  
The order took a whopping seven weeks to complete. Aklys Defense was out of a crucial part required for the stock and had created such a large backorder for them that they actually created a waiting list for the product.
We put the product together and took it out to test. The 3.5lb trigger pull I had originally with my Ruger BX Trigger had turned into a 14 plus pound pull that did not reset after a single shot. After looking online we found out that the fit on the bullpup was so tight for other users that they had to resort to sanding down the interior, especially in the areas around the trigger bar. Hours of sanding later, we had managed to restore the 3.5 pound pull.. It fits together perfect now.
Sand down the trigger bar and the track. Also, when using the charging handle that comes with the bullpup make sure that you pull the handle all the way forwards, as the tab that engages the factory charging handle can interfere with brass ejection while firing and cause a jam.

Was this review helpful to you?