PC Competition Adj. Trigger Kit for the Ruger® 10/22®- Delivers 2-3/4 lb. Trigger Pull Includes:
Competition Hammer & Sear Pack, Black Aluminum Trigger with a hole through the trigger to adjust the sear (trigger also has an overtravel adjustment screw), 2 Hammer Shims, 2 Trigger Shims, E.P. Hammer Spring, E.P. Disconnector Spring, & Replacement Trigger Return Spring
PC Exact Edge Extractor
PC Auto Bolt Release
WP Shock Absorb Bolt Buffer Pin
... Not compatible with the BX Trigger Assembly and 10-22 Magnum.

(12)

Redesigned hardened A2 tool steel extractor is sharp and strong which allows for positive extraction of spent casing

(6)

Custom design profile produces a 10/22 Firing Pin which is 43% lighter than the factory pin for faster lock time. Improved impact point for more positive ignition and less chance of misfires.

(1)

Made of hardened alloy steel with a hex head as an replacement for the factory screw. Longer threads for tighter capabilities. Sold as pair (2).

(4)

1/2 x 28 TPI. To compliment your threaded muzzle end barrel

(2)

1/2 x 28 TPI. To compliment your threaded muzzle end barrel

1/2 x 28 TPI. To compliment your threaded muzzle end barrel
***Ships Free With Barrel Purchase***

(4)

1/2 x 28 TPI. To compliment your threaded muzzle end barrel

This FirIng Pin is must for your Ruger® 10-22® Magnum. Wire EDM cut from A-2 Tool Steel. Included Extra Power Hammer Spring recommended for reduced incidence of misfires caused by light primer strikes

(1)

Reversible Picatinny Scope Rail is Weaver styled made of 6061 aircraft grade aluminum and anodized for the Ruger 10/22® receiver. This 1/2" height scope rail allows mounting of large optics and rings providing greater forward eye relief. By mounting the rail in reverse, allows a shorter eye relief for a younger generation shooter. The scope rail is precision machined offering 14 rail slots-laser engraved T-marked, 6 mounting countersunk holes and 4 mounting screws included.
The PA parts supplier is transitioning their parts from anodize (semi-gloss) to cerakote (duller) finish. Black Satin is discontinued and limited to stock on hand. After each part color, CK=cerakote SG=semi-gloss

(10)

The PA Extended Magazine Release for Ruger® 10/22® rifles and Charger™ pistols for quick magazine release with either factory 10 round or 25 round high capacity magazines. The EMR is machined from T6 aircraft aluminum in one piece and not a welded assembly. It installs in your factory trigger assembly (plastic ones or metal trigger housings) with no gunsmithing required. The design contours nicely with the factory trigger guard. CANNOT BE USED ON BX TRIGGER ASSEMBLIES.
The PA parts supplier is transitioning their parts from anodize (semi-gloss) to cerakote (duller) finish. Black Satin is discontinued and limited to stock on hand. After each part color, CK=Cerakote SG=Semi-Gloss

(14)

PA Replacement Trigger for Ruger® 10/22® rifles and Charger™ pistols. They are machined from aircraft grade aluminum and anodized in various colors in both matte and satin finishes. The trigger can easily replaces your existing factory trigger without gunsmithing required for a custom look. Replacing the trigger alone will not lighten trigger pull and is primarily a cosmetic upgrade for custom built rifles. ***NOTE: The PA Triggers will only fit in original Ruger® 10/22® trigger assemblies and cannot be used in the Ruger® BX trigger assemblies**
The PA parts supplier is transitioning their parts from anodize (semi-gloss) to cerakote (duller) finish. Black Satin is discontinued and limited to stock on hand. After each part color, CK=cerakote SG=semi-gloss

(4)

PA Extended Fluted Charging Handle for Ruger® 10/22® rifles and Charger™ pistols. They are machined from aircraft grade aluminum and anodized in various colors in both matte and satin finishes. Machined for a perfect drop in replacement fit in place of the standard factory cast steel charging handle with no gunsmithing required. Provides a non-slip grip and easily handled even in cold weather with gloves on. Comes complete with a precision CNC machined STAINLESS STEEL GUIDE ROD and a TARGET RECOIL SPRING.
The PA parts supplier is transitioning their parts from anodize (semi-gloss) to cerakote (duller) finish. Black Satin is discontinued and limited to stock on hand. After each part color, CK=Cerakote SG=Semi-Gloss

(28)

Pike Arms Extended Fluted Charging Handle for Ruger® 10/22® rifles and Charger™ pistols. They are machined from aircraft grade aluminum and skeletonized for maximum strength with minimum weight. Machined for a perfect drop in replacement fit in place of the standard factory cast steel charging handle with no gunsmithing required. Provides a non-slip grip and easily handled even in cold weather with gloves on. Comes complete with a precision CNC machined STAINLESS STEEL GUIDE ROD and a TARGET RECOIL SPRING.

(8)

CNC machined V-Block with built-in set screw. Designed to prevent Barrel Droop and position the barrel for your optics with the set screw. Comes complete with adjusting allen wrench.

(3)

PA BILLET 1" DIAMETER LOW PROFILE SCOPE RINGS

- FOR 1" DIAMETER SCOPE TUBES

- LOW PROFILE - FITS MOST 40MM OBJECTIVE SCOPES
- PICATINNY AND WEAVER RAIL COMPATIBLE

Inventory Reduction Sale-Special Pricing at $39.75 ... PA Billet Scope Rings are precision machined from billet aircraft grade aluminum (not an extrusion) and are professionally anodized in your choice of popular colors. They will fit either picatinny or weaver rails for 1" diameter scope tubes and have the correct scope to barrel clearance for most scopes with 40MM objectives.

Rings are sold in pairs (order quantity 1 and you will get 2 rings). Rings are easily assembled and mounted using standard allen wrenches (not included).

Ring Height Measurements Are:

.240" - Distance from top of rail to bottom of 1" scope diameter
The PA parts supplier is transitioning their parts from anodize (semi-gloss) to cerakote (duller) finish. Black Satin is discontinued and limited to stock on hand.

(1)

Replacement Ruger 10/22 Magnum ABR made of Titanium and manufactured by E.D.M. process. This strong light weight release extends 1/8" lower than the factory bolt release. Plus, it is serrated to give you a non-slip advantage to release your bolt easier and faster. It drops right in without any modifications.

(1)

Replacement protective cap 1/2 x 28 TPI for a threaded muzzle end barrel in Black Matte

The Pike Arms Extended Magazine Release for Ruger® 10/22® rifles and Charger™ pistols for quick magazine release with either factory 10 round or 25 round high capacity magazines. The EMR is machined from T6 aircraft aluminum in one piece and not a welded assembly. It installs in your factory trigger assembly (plastic ones or metal trigger housings) with no gunsmithing required. The design contours nicely with the factory trigger guard.

Black Matte & Dark OD Green are matte, all the other colors listed are of semi-gloss finish

***Free Shipping With Barrel Purchase***

This LBM is compatible with the Ruger10/22^® Takedown and 22 Charger™ Takedown barrels. This LBM also comes with LBM screws and Stock Takedown Screw w/Gold colored accent ring

(18)

Replacement Ruger 10/22 ABR made of A2-Steel and manufactured by E.D.M. process. It is serrated to give you a non-slip advantage to release your bolt if required. Eliminates the need for two handed bolt release required with the factory bolt release. When the bolt is held open just a slight pull on the bolt handle and the bolt will release. It drops right in without any modifications.

(1)

Ruger 10/22 Used Takeoff Parts Incl:
Hammer, Hammer Bushings, Hammer Spring, Disconnector & Trigger Pivot Pin, Sear Spring, Bolt Release and Magazine Release

Ruger 10/22 Used Takeoff Parts Incl:
Hammer, Hammer Spring, Disconnector & Trigger Pivot Pin, Sear Spring, Bolt Release and Magazine Release

RECEIVER / STOCK TAKEDOWN CAP SCREW, STAINLESS STEEL

Allen wrench cap screw stainless steel takedown screw to attach receiver to stock for 10/22 and Charger.
The allen wrench size is the same as the v-block screw.

(4)

Competition Hammer & Adjustable Pre-Travel Sear Kit - Delivers 2-3/4 lb. Tigger Pull. Includes 10-22 Competition Hammer, Sear w/Adjustable Screw, Allen Wrench, Hammer Spring, Disconnector Spring, Replacement Trigger Return Spring, 2 Hammer Shims, & 2 Trigger Shims. EDM Produced.
... Not compatible with the BX Trigger Assembly and 10-22 Magnum

(1)

Made of Black Delrin 150NC010 acetal homopolymer resin technology by Dupont providing the stiffness and tensile strength yet absorbing and dispersing the shock associated with factory metal bolt buffers. Unlimited lifetime warranty against breakage.

(3)

Used Small Scope Parts Incl:
1" scope rings, threaded turret covers, 1-1/2" & 1- 3/8" lens cover

LR (long rifle) NF (no flutes), TH (.500 x 28 TPI threaded muzzle-end w/protective cap) Solid anodize .860 Barrel for the Precision Rimfire Bolt Action Rifle.
USED BARREL: Very accurate at 30 & 50 yard range. Center shots dime size. (see target pictures). Sighted in with a strapped down Caldwell Lead Slead. A few very small nics into the anodize.